Primula Vapormat

103-03-000 VAPORMAT 1-2.5 With 1 steam valve. Steam supply for 1 steam iron Industrial electric steam generator for continuous operation Connection 230V 50Hz Heating power 2.5kW Steam capasity 3.25kg/hour Electronically controlled by a PCB with an electronic keyboard, automatic fault detection system, and water level control system by three electrodes. Different connections for one, two or three steams irons. Suitable for the garment industry, dry cleaners, tailor shops and ateliers. Special Features & Remarkable advantages: - Electronic water level control system by 3 electrodes. - Fault detection program and electronic keyboard with touch buttons. - Cylindrical steel boiler 8.5 L / thickness 7.1 mm (the water drops glide down to the bottom of the boiler). - Outside and inside welding of the boiler to avoid oxidation. - Double steam outlet for 2 irons, which keeps the steam dry. - Water inlet from a copper tube Ø12mm. - External safety valve, according to the TÜV safety regulations. - 20 L external water tank. - Wheels for easy drive and service. - Operation through a main switch. - Built-in electric water pump, amplified against pressure, with thermal protection. - Electronic circuit card connected by faston connectors for easier and cheaper service. The card controls all the operations of the generator that are indicated by the keyboard signals. This way the operator is able to provide information to the technical assistance department. It also controls the automatic water-feeding system. - Low safety voltage (24 Volt) on the electronic control keyboard, on the pressostat and on the electrodes. - Blocking system placed on the water outlet valve for more safety against burnings. - Overheating system: This is an innovative technology of Vapormat. Overheating system is an electric safety system. A problematic function of the water’s level control system (caused due to cumulative salts on the electrodes-bad maintenance or by the overpressure of the steam generator -more than 3.5 bar) can result in the overheating of the generator. In that case the overheating system causes the heating element’s burning. Steel Boiler…………………….Steel 8.5 L Operating pressure…………...3.5 bar or (4.5 bar after request) Test pressure………………….6 bar For the trouble free operation of the steam generator we recommend the use of our binding agent Antiscal.